System features
Aluminum system to create swing or sliding gates for house entrances, allowing the execution of gratings with the same appearance.
Product implemented in accordance with the EN 13241-1 general regulations of performance and security european standard.
The GP system combines the quality, durability and elegance concepts and has a range of easy to use and low maintenance accessories.
The gate models are compatible with the classic automations for swing or sliding openings.
Aluminium profiles
The aluminum profiles are extruded in aluminum alloy 6060 for the architecture according to the NP EN 12020-02.
The aluminum profiles that make up the GP system are lacquered by the Qualicoat quality seal standard, including the Seaside class (Qualimarine equivalent), or anodized by the requirements of the Qualanod quality seal.
Swing gate
• Main section profiles with 50 mm and an average thickness of 2.5 mm.
• Possibility of implement 1 or 2 inner or outer opening sheets with fingers anti-entrapment system option.
• Several types of filling, from 9 mm to 20 mm.
• Union of hoops made with special opening barbell screws with anti-corrosion treatment.
• The union is reinforced with aluminum pads.
• Upper pivot made from injected aluminum with 20 mm inox axis allowing millimeter adjustment in all 3 axes.
• Lower Pivot made from injected aluminum with 20 mm inox axis allowing lateral adjustments.
• Pivot set made from copper-aluminium with 12 mm axis with multi-regulation.
• Aluminum hinges of 2 or 3 flaps with internal reinforcement enabling adjustment in all 3 axes.
Sliding gate
• Main section profiles with 50 mm and an average thickness of 2.5 mm.
• Several types of filling, from 9 mm to 20 mm.
• Union of hoops made with special opening barbell screws with anti-corrosion treatment.
• The union is reinforced with aluminum pads.
• Rail with self-adjustable rollers vertical support.
• Lock with snap hook.
• High strength and performance wheels.
• 3 or 6 meters steel rail to slip of the wheels
Grating
• Main section profiles with 50 mm and an average thickness of 2.5 mm.
• Identical profiles typology used in the railing implementation.
• Union of hoops made with special opening barbell screws with anti-corrosion treatment.
• Self-adjusting vertical profiles.
Sizing and maneuverability
• Maximum dimensions for 1 sheet swing gate*: 1600 mm (L) x 2200 mm (H)
• Maximum dimensions for 2 sheet swing gate*: 5500 mm (L) x 2000 mm (H)
• Maximum dimensions for sliding gate*: 6000 mm (L) x 2200 mm (H)
• Maximum dimensions between uprights for railing*: 6500 mm (L) x 2200 mm (H)
* Maximum sizing varies depending on the filler type and opening hardware.
